Spring Eye Bushing Puller Kit with Air Pump - 18 Ton
REHOBOT's EBH18 Extended hydraulic spring eye bushing replacement kit has been developed together with commercial vehicle manufacturers and vehicle workshop staff to provide a lightweight, in situ time and labour saving solution for all makes and models of commercial vehicles.
Using this 18 ton capacity lightweight aluminium hollow bore cylinder and the comprehensive set of accessories contained within the kits, the equipment can be easily used on any vehicle and give the following major benefits.
All models of HGV catered for safe, simple and speedy hands free process. Up to 60% time and labour cost saving on traditional methods. The lightweight and compact design allows work to be carried out on the vehicle even where access is restricted. Little or no manual effort is required. All work carried out in-situ on the vehicle. Total weight of 8 kg's fully assembled falls well within EU manual handling of loads regulations. Can be easily and cheaply upgraded should new vehicle types be introduced onto the market.
Sequence of operation
Several vehicle makes now use met-elastic spring eye bushes, for which REHOBOT has developed a series of extraction/insertion sleeves and formed dollies for specific vehicle makes and models- for more information please contact us.
This kit comes with PP70B-1000/LS250 pump with a 2.5m hose length, with a working pressure of 70 Mpa, Working pressure 70 MPa, Air Pressure 6-10 Bar, Weight 7.0kg.
Kit contains:
Cylinder
Rods
- TR16-500 (M16 12,9 L= 500mm)
- TR20-500 (M20 10,9 L=500mm)
- TR24-500 (M24 10,9 L=500mm)
Adapter
Sleeve
- TA49 (Ø49mm)
- TA73 (Ø73mm)
Press plates
- BR35-16 (Ø35 mm / Ø16 mm)
- BR45-16 (Ø45 mm / Ø16 mm)
- BR55-20 (Ø55 mm / Ø20 mm)
- BR65-20 (Ø65 mm / Ø20 mm)
- BR70-24 (Ø70 mm / Ø24 mm)
- BR90/80-30 (Ø90/80 mm / Ø45 mm)